Blog
How to Cut Neon LED Strips: Tools & Techniques
Cutting neon LED strips cleanly requires knowing whether the strip is silicone-coated or PVC-encased, and cutting only at designated solder pads. Cutting outside cut points
How to Hang Sign Letters: Screws, Hooks & Hidden Mounts
Hanging sign letters securely requires matching the mounting method to substrate (drywall: 25-45 kg/anchor, concrete: 80-200 kg), letter weight (acrylic: 0.5-3 kg each), and visibility
Magnetic Track Systems for LED Signs: Installation Guide
Magnetic LED track systems reduce installation time by 40-60% vs screw-mounted alternatives, but only when magnet type, track profile, and surface prep are matched. Neodymium
Backlit Sign Support Systems: Poles, Brackets & Feet Compared
For 80% of channel letter installations between 40-80 cm, L-shaped support poles provide the optimal balance of strength, installation speed, and cost. When letters exceed 100 cm or installations face wind speeds above 115 mph, welding brackets are the safer choice. This guide compares 4 support systems with quantified load capacities and ASCE 7-22 wind-resistance thresholds.
Fastener Guide for Sign Makers: Screws, Nuts, Clips & Hooks
Sign fastener selection depends on three variables: material type (acrylic, aluminum, PVC), load requirement (static wall mounting vs. suspended ceiling), and environmental exposure (indoor climate-controlled
The Sign Maker’s Guide to Adhesives: Which Glue to Use for Every Material
Sign-making adhesives fall into seven main categories, each engineered for a specific substrate: acrylic solvent glue, UV-stabilized acrylic glue, PVC foam board contact adhesive, flex